Synergy Manufacturing 8007 Steering Stabilizer
SYNERGY 8007 JEEP JK FOX STEERING STABILIZER RELOCATION BRACKET
- SYNERGY 8007 JEEP JK FOX STEERING STABILIZER RELOCATION BRACKET
Synergy Jeep Steering Stabilizer Clamp (Steering Stabilizer Clamp (1-3/8" OD tube))
These CNC machined steering stabilizer clamps are designed to mount any steering stabilizer utilizing a 1/2" mounting bolt to a 1-3/8" diameter tie rod or drag link. These are for steering stabilizers only and are not intended for use with hydro assist. CNC extruded and machined from 6061-T6 aluminum alloy Black anodized for maximum corrosion resistance 100 bolt on components assures an easy, trouble free installation with the use of basic hand tools 8003 has been superseded by 8003-20 Note: Some late model Jeep JK (2011) factory stabilizers will require the inner bushing sleeve to be drilled out to 1/2" for compatibility. This sleeve is made of hardened steel, so be sure you have the resources to drill it out. Alternatively, an aftermarket stabilizer is recommended. Fitment: Factory Jeep JK Tie Rod (8003-20) Synergy Jeep JK Tie Rod (8003-20) Synergy Jeep TJ/XJ/ZJ/MJ Drag Link (8003-20)
- CNC extruded and machined from 6061-T6 aluminum alloy
- Black anodized for maximum corrosion resistance
- 100 bolt on components assures an easy, trouble free installation with the use of basic hand tools
Synergy Jeep JL Steering Stabilizer Relocation Kit
This kit is required for retaining a steering stabilizer when installing a Synergy MFG 8802-01 Tie Rod. The included stabilizer mount stud is designed to mount any steering stabilizer that uses a inch mounting bolt. It replaces the axle side track bar bolt to relocate the steering stabilizer above the tie rod. The stock JL steering stabilizer can be easily drilled out to inch to fit. The stabilizer mount stud cannot be installed in the stock axle side track bar bolt location with aftermarket knuckles that move the tie rod up. Fits: 18 Jeep Wrangler JLU 18 Jeep Wrangler JL Benefits: Allows a steering stabilizer to be mounted with the Synergy JL Tie Rod Moves steering stabilizer up and out of the way to prevent damage Features: Low profile stabilizer mounting stud prevents interference with Synergy upgraded steering components Replaces axle side track bar mounting bolt 1.5 inch clamp for attaching stabilizer to the Synergy JL Tie Rod 100 percent bolt on components assure an easy, trouble free installation with the use of basic hand tools Includes: (1) 8806-01 Jeep Track Bar Stabilizer Mount Stud (1) 4050-50 Tie Rod Stabilizer Mount Clamp, 1.5 inch Notes: Required when using Synergy 8802-01 JL Tie Rod to mount a steering stabilizer
- Required when using Synergy 8802-01 JL Tie Rod to mount a steering stabilizer
- Replaces axle side track bar mounting bolt
- 1.5 inch clamp for attaching stabilizer to the Synergy JL Tie Rod
- Low profile stabilizer mounting stud prevents interference with Synergy upgraded steering components
Supreme Suspensions - Carbon Steel Adjustable Tie Rod for 2007-2018 Jeep Wrangler
Supreme Suspensions - Adjustable Tie Rod
Our Supreme Pro-series Adjustable Tie Rods are designed to correct and prevent oscillation in the driveline. This kit is engineered to replace your factory worn out tie rod and directly fit the new one, knuckle to knuckle, increasing leverage of larger tires. This adjustable tie rod gives you the ability to mildly rock crawl, and was built with security in mind. Each rod is machined from high-grade carbon steel and then hard coated to prevent rust and corrosion when out in the elements. This system works well with both 2 and 4 door models and is the perfect upgrade over stock. All Supreme Suspensions products are proudly developed and rigorously tested by in-house ASE certified specialists to ensure proper road safety.
For proper use, 4-1/2" wheel back spacing (or less) is recommended. Your wheels must not have more than 4-3/4" backspace or the Tie Rod can come in contact with the wheels. Aftermarket wheel spacers can help solve this problem, especially on factory wheels.
2007 - 2015 Jeep Wrangler JK 2WD 4WD
(1x) Carbon Steel Adjustable Tie Rod
An alignment is always recommended if you are altering the height of your vehicle. Please remember to double check all fittings for tightness before operating vehicle.
- FITMENT: 2007 - 2018 Jeep Wrangler JK (2WD 4WD).
- CONTENTS: (1x) Carbon Steel Adjustable Tie Rod and Installation Instructions.
- TECHNICAL NOTES: Corrects and Prevents Oscillation In The Driveline.
- INSTALLATION: Easy bolt-on installation takes 1 to 2 hours. For proper use, 4-1/2" wheel back spacing (or less) is recommended. Your wheels must not have more than 4-3/4" backspace or the Tie Rod can come in contact with the wheels. Aftermarket wheel spacers can help solve this problem, especially on factory wheels.
- BENEFITS: Replaces your worn out tie rod with our superior carbon steel tie rod. Carbon steel is used due to its higher strength, durability and resistance to bending.
Fox Racing 983-02-070 2.0 Performance ATS Steering Stabilizer 07-16 Jeep Wrangler Stock & 1 3/8" Tie Rod
Theis Fox 2.0 Performance ATS Steering Stabilizer fits 07-16 Jeep Wranglers with stock & 1 3/8" tie rods.
The FOX Performance Series Adjustable Through Shaft (ATS) steering stabilizer offers unrivaled steering control and a striking high tech appearance. The technologically advanced design cancels unwanted steering forces in both directions, taking the place of two conventional opposing stabilizers. It will also respond to your input with 24 clicks of external adjustment to fine tune the feel. The integrated reservoir allows for additional fluid capacity and improves cooling during extreme use. Also included is FOX's relocating hardware that moves the steering stabilizer up and out of the way utilizing a new track bar relocation bolt and 1-3/8" tie-rod mounting clamp. An optional 1-5/8" mounting clamp is available for larger aftermarket tie-rods. The ATS represents a revolutionary breakthrough in stabilizer design.
- 2.0" smooth bore and honed seamless alloy Bodies
- Race-developed High-Flow piston design
- Zinc-plated and double-clear Coated for long lasting finish
Synergy Manufacturing 8568-10 Steering Stabilizer Clamp
- SYNERGY 8568-10 DODGE STEERING STABILIZER CLAMP
Synergy Manufacturing 8568-01 Steering Stabilizer
SYNERGY 8568-01 DODGE TIE ROD
- SYNERGY 8568-01 DODGE TIE ROD
Synergy Jeep JK Heat Treated Tie Rod (8002)
SYNERGY 8002 JEEP JK HEAVY DUTY CHROMOLY TIE ROD
- SYNERGY 8002 JEEP JK HEAVY DUTY CHROMOLY TIE ROD
Synergy 132500/143500 8525-0 Dodge Truck Heavy Duty Steering Kit (132500/143500)
Fitment: RAM Truck 14 2500 4x4, 13 3500 4x4 Tie Rod: Ram Heavy Duty Tie Rod. All new design and components specific to the new radius arm Ram Truck platform. Direct bolt-in replacement for the stock tie rod for an immediate upgrade in steering feel and strength. No wheel size requirements! Can be installed on a stock Ram with stock wheels and tires. Tie rod is made from heat treated chromoly for maximum strength. Low misalignment dust boots eliminate tie rod flop. You will not find a better tie rod on the market! Drag Link: Ram Heavy Duty Drag Link. All new design and components specific to the new radius arm Ram Truck platform. Direct bolt-in replacement for the stock drag link for an immediate upgrade in steering feel, stiffness, and strength. Drag link is made from high quality DOM steel tubing for maximum strength. Single plane tie rod end on the pitman arm side eliminates drag link flop. You will not find a better drag link on the market! Steering Stabilizer Bracket: Fabricated Steering Stabilizer bracket for 13 Ram Trucks running the Synergy HD Tie Rod. Will allow installation of factory or aftermarket steering stabilizer with 1/2 inch mounting bolt. Fits 1 3/4 inch diameter tie rod bars.
- Complete Synergy Heavy Duty Steering Kit
- Includes Synergy Ram Truck Heavy Duty Drag Link
- Includes Synergy Ram Truck Heavy Duty Tie Rod
- Includes Synergy Ram Truck Steering Stabilizer Bracket
Currie Enterprises CE-9702SB Steering Stabilizer Shock Bracket Kit for 1-3/8" Tube Tie Rod
Steering Damper Mount KitSteering Stabilizer Shock Bracket KitSteering Stabilizer Shock Bracket Kit; For 1 3/8 in. Tube Tie Rod;SPECIFICATIONS:WARNING CA Proposition 65: YesWARNING CA Proposition 65 Message: WARNING: These products can expose you to chemicals including Chromium; Lead; Lead Compounds; Nickel Metallic; Nickel Compounds; Diisonyl and Di2-ethylhexyl Phthalates DEHPDINP which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information; visit www.P65warnings.ca.gov.FEATURES:Steering Stabilizer Shock Bracket KitThis steering stablizer shock bracket kit is designed to bolt to a 1 3/8" diameter tie rod such as those used in our TJ bolt in 1 ton frontend packages. Kit includes bracket, shock stud kit and u-bolts with nuts.Frank Currie began designing and building differentials for material-handling equipment back in 1959. He worked out of his garage fabricating and assembling rearends for personnel carriers, electric carts, tugs, scissor lifts and other specialty vehicles. Today Currie Enterprises occupies a 27,000-square-foot complex in East Anaheim, California. The company has grown in size and the product line has continued to expand. Currie Enterprises now has nearly 50 employees and boasts a state-of-the-art manufacturing facility. The Curries design, build, modify, test, sell, and install rearend and drive-train products, all under one roof. From humble beginnings as a dream of Frank and Evelyn, Currie Enterprises has become the most recognized name in specialty rearends and components. Currie Enterprises is preparing for the future by redesigning and manufacturing the components needed to continue offering complete rearends that
- Steering Stabilizer Shock Bracket Kit.
- 2 disc bluray case
- Turquoise decorations for living room
- Usb power adapter 2a eu
- Neon signs red dog
- Tommy hilfiger boots
- Electric roasters with removable pan